A star drill is a specialized chisel used to make holes in stone, concrete, and masonry. Drilling holes with this tool involves hitting it with a hand-held sledge, slightly rotating it, and then hitting it again. Do this enough times, and you will eventually create a hole.
Manufacturer: Stanko. Conditioned Drilling capacity: – In steel: 50 mm – In cast iron: 63 mm. Spindle overhang: – Max 1600 mm – Min 375 mm. Distance from spindle nose to working surface of table: – Max. 1 600 mm – Min. Spindle taper: MT5. Max spindle travel: 400 mm. Spindle speed range: 18-2000 rpm. 83' x 492' Stanko 1A670, 2-Carriages, 3-Way Bed, Power Tailstock, 120 RPM 65 Ton Cap.' Wholesale Trader of Milling machine - Stanko Universal Milling Machine, Gate Giewont Pure Vertical Milling Machine, Universal Milling Machine and Kondia Milling Machine offered by RPM Machines India, Mumbai, Maharashtra.
You can still buy star drills but few people today would consider using one, not when electric rotary hammers are available for drilling concrete and masonry. A rotary hammer uses a motor and gears to replicate the hit/turn/hit/turn action of a star drill. Only it does it faster and with less reliance on muscle. The pneumatic rock drills used for mining do more or less the same.
Interestingly, rotary hammer bits frequently have the same cross shaped tips as the star drill—but made from carbide instead of hardened steel.
In between the invention of the star drill and that of the modern rotary hammer were some interesting manual solutions. The person who devised the hand-powered machine in the video below had a sense of humor or was extremely literal in his thinking—along the lines of 'if drilling holes by hand requires a hammer then doing it with a machine must require them too'.
Air Force Drill Manual
In spite of being manually operated, the machine in the video below has more in common with the modern rock drill or rotary hammer. Where it differs, aside from being human powered, is the way the blow is directly transferred to the back of the bit. In today's rotary hammers the drive piston never actually touches the back of the bit holder. Instead, the drive piston drives a second piston (flying piston) forward on a cushion of air and it hits the back of the bit holder.
The gif below was pulled from an animation of an older DeWalt electric rotary hammer. Mechanisms vary from tool to tool but what it shows is illustrative of what happens in nearly every modern machine. The drive piston is separated from the flying piston by a cushion of air, which prevents the motor from being damaged by isolating it from vibration that would be transmitted back from the bit.
The following pages below are a part of our manuals section. The pricing guide is at the bottom of this page. We use PayPal for credit card payments.
Sacem (3-) 110 054 Electrical Diagrams – Machine Control & Drives – 100 Pgs
Sacem Model MNU-90 Boring & Milling Machine – Operation & Parts Manual – 156 pgs
Sacem Model MST-90 Boring & Milling Machine – Operation & Parts Manual – 271 pgs
Sacem MST.XC.110 Mechanical Manual – 56 pgs
San Yuen Lathe – Models SAG-1800, 2500, 2500H – Parts Manual 52 pgs
San Yuen Taper Attachment – Operation Manual – 10 pgs
Sasta – CA 565 AC 20 Special Pipe-Threading Machine- Operating Manual Electrical Equipment – 22 pgs
Sasta – CA 565 AC 20 Specialized Turning Machines for Pipe-Threading – Modifications – Maintenance Manual – 84 pgs
Sasta – CA 565 AC 20 Turning Lathe – Operating & Spare Parts Manual – Volume 1 – 146 pgs
Sasta – CA 565 AC 30 Special Pipe-Threading Machine- Operating Manual Electrical Equipment – 22 pgs
Sasta – CA 565 AC 30 Specialized Turning Machines for Pipe-Threading – Modifications – Maintenance Manual – 94 pgs
Sasta – CA983C020-CA983C030 Special Pipe Threading Machine – Operation Manual – 122 pgs
Sasta – CA983C030 Specialized Pipe-Threading Machine- Operating & Spare Parts Manual – 64 pgs
Sasta – CA983K Specialized Pipe-Threading Machine – Spare Parts Manual – 183 pgs
Sedin-Stan Canada – 16K30 CNC Lathe Power – Diagrams – 1 of 9
Sedin-Stan Canada CNC Single-Column Vert. Turning & Boring Mills 1A512M03 & 1A516M03 – Service Manual – 62 pgs
Sidney 14 and 16 Inch Lathe – Model 32 – Operation Manual – 45 pgs
Siemens – Simodrive – 6SC6101-.A-Z, 6SC6101-.B-Z Transistor PWM Inverter for 3 Phase Feed Drive with Analog Control – 65 pgs
Siemens – Simodrive 650 – Transistor PWM Inverters for 3 Phase Main Spindle Drives – Addendum – 46 pgs
Siemens – Simodrive 6SC65.-4AA02 – Transistor PWM Inverters for 3 Phase Main Spindle Drives – 106 pgs
Siemens – Simoreg 6RA24 – Safety, Installation, Operation Manual – 235 pgs
Siemens – Sinumerik 3T – 3TT – Basic Version 4 C – Programming Instructions – 223 pgs
Siemens – Sinumerik System 3 – Basic Version 4C – Edition 05.89 – 416 pgs
Siemens – Sinumerik System 3 – Part 3 Basic Version 4 – Operating Instructions – 207 pgs
Siemens System 3 – 140 pgs
Siemens Simodrive 611 Universal, 611 Universal E – Functions Manual – 902 pgs
Siemens Simodrive Sinumerik 840D-840Di,810D – Diagnostics Manual – 686 pgs
Siemens Simodrive Sinumerik 840D-840Di,810D – Operators Manual – 520 pgs
Simmons Micro Speed Shaper – Maintenance & Parts Manual – 18 pgs
Smith & Mills Shaper – Operators and Parts Manual – 53 pgs
SMT-Pullmax – Swedturn 6 CNC 300 – Electrical Drawings Manual – 267 pgs
SMTW – Semi-Automatic Cylindrical Grinder – Model H209 – Operation Manual 132 pgs
SMW Power Chuck – Service Manual – 87 pgs
Sony Digital Readout Instruction for Head Cable Unit Manual – 20 pgs
Sony Digital Readout Instruction Manual for Scale Set GB-5A-220A and Scale Unit SR127-005-125 & SR128-005-220 – Instruction Manual – 109 pgs
Sony GF-R & SR50-RE Series Magnescale – Instruction Manual – 32 pgs
Sony LH11 Magnescale – Instruction Manual – 60 pgs
Sony Magnescale Digital Counter LF-200 – Service Manual – 93 pgs
Sony Magnescale GF Series – GF20E to 205E – Service Manual – 53 pgs
Sony Magnescale LM Series – Service Manual – 106 pgs
Soraluce Model TR-2 Radial Drill – Instruction Manual – 34 pgs
Soraluce Model TR-3 Radial Drill – Use and Maintenance Manual – 32 pgs
Southbend – Johnson OBI Power Press – Operation & Maintenance Manual – 63 pgs
Speedfam – Spitfire Abrasive Machine Systems – Operators & Maintenance Manual – 43 pgs
Spindle Wizard Quill Actuator Series 2 Model 4 – Maintenance & Service Manual – 8 pgs
Spitfire Model SP-F888-36PN 36 Inch Gyro-Matic Flat Lapping Machine – Instruction & Parts Manual – 26 pgs
Sedin – Stan Canada – Dbl Column Mills 1525 & IJ1532 Diagrams – 15 pgs
Stanko – CNC Single-Column Vertical Turning & Boring Mill – 1A512M03 1A516M03 – Service Manual – 59 pgs
Stanko – Vertical Boring Mill – 1A516M03 – Operators Manual – 135 pgs
Standard Automatic Bandsaws – Service Manual – 25 pgs
Standard Modern Lathe – Model 1960 & 1980 – Operators Manual – 35 pgs
Summit 12 Inch Hydraulic Surface Grinders – 55 pgs
Summit 3 & 4 Inch Radial Drill – Operation & Parts Manual – 46 pgs
Summit 4 Inch Horizontal Boring Mill – Parts Manual – 103 pgs
Summit Model 350-MP High Speed Bandsaw – Operators & Parts Manual – 28 pgs
Sundstrand C5U Rigidmil – Assembly Drawings & Parts Manual – 33 pgs
Sundstrand C5U Rigidmil – Installation, Operation & Maintenance Manual – 30 pgs
Sundstrand Horizontal Simlex Rigidmils – Installation, Operation & Maintenance Manual – 75 pgs
Sundstrand Model D Rotary Surface Grinder – Installation, Operation & Maintenance Manual – 53 pgs
Sunnen Cylinder King Model CV-616 Automatic Vertical Honing Machine – Parts Manual – 26 pgs
Sunnen Model CV-616 Install, Setup & Maintenance Manual – 57 pgs
Sunnen Model MBB-1600 Precision Honing Machine – Operation & Maintenance Manual – 35 pgs
Sunnen Model MBB-1600, 1600MS, 1600JIC Precision Honing Machine – Operation & Maintenance Manual – 40 pgs
Sunnen Model MBB-1600, 1600MS, 1600JIC Precision Honing Machine – Parts Manual – 20 pgs
Sunnen Model MBB-1650, 1650MS, 1650JIC Precision Honing Machine – Operation & Maintenance Manual – 40 pgs 165B
Sunnen Model MBB-1650, 1650MS, 1650JC Precision Honing Machine – Parts Manual – 30 pgs
Sunnen Model MBB-1680, 1680MS, MBH2580, 2580MS Precision Honing Machine – Parts Manual – 38 pgs
Sunnen Model PF-1000 Grit Guard Oil Filter – Operating & Maintenance Manual – 8 pgs
Sunnen Model PF-1005 & PF-1006 Oil Filter – Parts Manual – 12 pgs
Sunnen Model PF-150 Grit Guard Oil Filter – Installation, Operating & Maintenance Manual – 11 pgs
Superior Model HM 3390 Honing Machine – Maintenance & Parts Manual – 18 pgs
Supermax Vertical & Horizontal MM – Operators & Parts Manual – 73 pgs
Supermax YCM-2GS Mechanical Manual – 103 pgs
Supertec STP-1834A AD – 1022A AD Hydraulic Surface Grinder – 78 pgs
Sweo Controls – Model 840 Regenerative DC Drive – Install & Service Manual – 69 pgs
Swisher Grinder – Operation, Maintenance & Parts Manual – 11 pgs
Stanko Drill Manual Pdf
For more information on pricing and availability of all manuals please contact:
Pricing for all manuals listed above:
Libreoffice draw for mac. For Manuals under 25 pages – Please call for Special Pricing.
$40.00 total – from 0 to 50 pages
Manufacturer: Stanko. Conditioned Drilling capacity: – In steel: 50 mm – In cast iron: 63 mm. Spindle overhang: – Max 1600 mm – Min 375 mm. Distance from spindle nose to working surface of table: – Max. 1 600 mm – Min. Spindle taper: MT5. Max spindle travel: 400 mm. Spindle speed range: 18-2000 rpm. 83' x 492' Stanko 1A670, 2-Carriages, 3-Way Bed, Power Tailstock, 120 RPM 65 Ton Cap.' Wholesale Trader of Milling machine - Stanko Universal Milling Machine, Gate Giewont Pure Vertical Milling Machine, Universal Milling Machine and Kondia Milling Machine offered by RPM Machines India, Mumbai, Maharashtra.
You can still buy star drills but few people today would consider using one, not when electric rotary hammers are available for drilling concrete and masonry. A rotary hammer uses a motor and gears to replicate the hit/turn/hit/turn action of a star drill. Only it does it faster and with less reliance on muscle. The pneumatic rock drills used for mining do more or less the same.
Interestingly, rotary hammer bits frequently have the same cross shaped tips as the star drill—but made from carbide instead of hardened steel.
In between the invention of the star drill and that of the modern rotary hammer were some interesting manual solutions. The person who devised the hand-powered machine in the video below had a sense of humor or was extremely literal in his thinking—along the lines of 'if drilling holes by hand requires a hammer then doing it with a machine must require them too'.
Air Force Drill Manual
In spite of being manually operated, the machine in the video below has more in common with the modern rock drill or rotary hammer. Where it differs, aside from being human powered, is the way the blow is directly transferred to the back of the bit. In today's rotary hammers the drive piston never actually touches the back of the bit holder. Instead, the drive piston drives a second piston (flying piston) forward on a cushion of air and it hits the back of the bit holder.
The gif below was pulled from an animation of an older DeWalt electric rotary hammer. Mechanisms vary from tool to tool but what it shows is illustrative of what happens in nearly every modern machine. The drive piston is separated from the flying piston by a cushion of air, which prevents the motor from being damaged by isolating it from vibration that would be transmitted back from the bit.
The following pages below are a part of our manuals section. The pricing guide is at the bottom of this page. We use PayPal for credit card payments.
If you have any questions, please do not hesitate to email or call.Sacem (3-) 110 054 Electrical Diagrams – Machine Control & Drives – 100 Pgs
Sacem Model MNU-90 Boring & Milling Machine – Operation & Parts Manual – 156 pgs
Sacem Model MST-90 Boring & Milling Machine – Operation & Parts Manual – 271 pgs
Sacem MST.XC.110 Mechanical Manual – 56 pgs
San Yuen Lathe – Models SAG-1800, 2500, 2500H – Parts Manual 52 pgs
San Yuen Taper Attachment – Operation Manual – 10 pgs
Sasta – CA 565 AC 20 Special Pipe-Threading Machine- Operating Manual Electrical Equipment – 22 pgs
Sasta – CA 565 AC 20 Specialized Turning Machines for Pipe-Threading – Modifications – Maintenance Manual – 84 pgs
Sasta – CA 565 AC 20 Turning Lathe – Operating & Spare Parts Manual – Volume 1 – 146 pgs
Sasta – CA 565 AC 30 Special Pipe-Threading Machine- Operating Manual Electrical Equipment – 22 pgs
Sasta – CA 565 AC 30 Specialized Turning Machines for Pipe-Threading – Modifications – Maintenance Manual – 94 pgs
Sasta – CA983C020-CA983C030 Special Pipe Threading Machine – Operation Manual – 122 pgs
Sasta – CA983C030 Specialized Pipe-Threading Machine- Operating & Spare Parts Manual – 64 pgs
Sasta – CA983K Specialized Pipe-Threading Machine – Spare Parts Manual – 183 pgs
Sedin-Stan Canada – 16K30 CNC Lathe Power – Diagrams – 1 of 9
Sedin-Stan Canada CNC Single-Column Vert. Turning & Boring Mills 1A512M03 & 1A516M03 – Service Manual – 62 pgs
Sidney 14 and 16 Inch Lathe – Model 32 – Operation Manual – 45 pgs
Siemens – Simodrive – 6SC6101-.A-Z, 6SC6101-.B-Z Transistor PWM Inverter for 3 Phase Feed Drive with Analog Control – 65 pgs
Siemens – Simodrive 650 – Transistor PWM Inverters for 3 Phase Main Spindle Drives – Addendum – 46 pgs
Siemens – Simodrive 6SC65.-4AA02 – Transistor PWM Inverters for 3 Phase Main Spindle Drives – 106 pgs
Siemens – Simoreg 6RA24 – Safety, Installation, Operation Manual – 235 pgs
Siemens – Sinumerik 3T – 3TT – Basic Version 4 C – Programming Instructions – 223 pgs
Siemens – Sinumerik System 3 – Basic Version 4C – Edition 05.89 – 416 pgs
Siemens – Sinumerik System 3 – Part 3 Basic Version 4 – Operating Instructions – 207 pgs
Siemens System 3 – 140 pgs
Siemens Simodrive 611 Universal, 611 Universal E – Functions Manual – 902 pgs
Siemens Simodrive Sinumerik 840D-840Di,810D – Diagnostics Manual – 686 pgs
Siemens Simodrive Sinumerik 840D-840Di,810D – Operators Manual – 520 pgs
Simmons Micro Speed Shaper – Maintenance & Parts Manual – 18 pgs
Smith & Mills Shaper – Operators and Parts Manual – 53 pgs
SMT-Pullmax – Swedturn 6 CNC 300 – Electrical Drawings Manual – 267 pgs
SMTW – Semi-Automatic Cylindrical Grinder – Model H209 – Operation Manual 132 pgs
SMW Power Chuck – Service Manual – 87 pgs
Sony Digital Readout Instruction for Head Cable Unit Manual – 20 pgs
Sony Digital Readout Instruction Manual for Scale Set GB-5A-220A and Scale Unit SR127-005-125 & SR128-005-220 – Instruction Manual – 109 pgs
Sony GF-R & SR50-RE Series Magnescale – Instruction Manual – 32 pgs
Sony LH11 Magnescale – Instruction Manual – 60 pgs
Sony Magnescale Digital Counter LF-200 – Service Manual – 93 pgs
Sony Magnescale GF Series – GF20E to 205E – Service Manual – 53 pgs
Sony Magnescale LM Series – Service Manual – 106 pgs
Soraluce Model TR-2 Radial Drill – Instruction Manual – 34 pgs
Soraluce Model TR-3 Radial Drill – Use and Maintenance Manual – 32 pgs
Southbend – Johnson OBI Power Press – Operation & Maintenance Manual – 63 pgs
Speedfam – Spitfire Abrasive Machine Systems – Operators & Maintenance Manual – 43 pgs
Spindle Wizard Quill Actuator Series 2 Model 4 – Maintenance & Service Manual – 8 pgs
Spitfire Model SP-F888-36PN 36 Inch Gyro-Matic Flat Lapping Machine – Instruction & Parts Manual – 26 pgs
Sedin – Stan Canada – Dbl Column Mills 1525 & IJ1532 Diagrams – 15 pgs
Stanko – CNC Single-Column Vertical Turning & Boring Mill – 1A512M03 1A516M03 – Service Manual – 59 pgs
Stanko – Vertical Boring Mill – 1A516M03 – Operators Manual – 135 pgs
Standard Automatic Bandsaws – Service Manual – 25 pgs
Standard Modern Lathe – Model 1960 & 1980 – Operators Manual – 35 pgs
Summit 12 Inch Hydraulic Surface Grinders – 55 pgs
Summit 3 & 4 Inch Radial Drill – Operation & Parts Manual – 46 pgs
Summit 4 Inch Horizontal Boring Mill – Parts Manual – 103 pgs
Summit Model 350-MP High Speed Bandsaw – Operators & Parts Manual – 28 pgs
Sundstrand C5U Rigidmil – Assembly Drawings & Parts Manual – 33 pgs
Sundstrand C5U Rigidmil – Installation, Operation & Maintenance Manual – 30 pgs
Sundstrand Horizontal Simlex Rigidmils – Installation, Operation & Maintenance Manual – 75 pgs
Sundstrand Model D Rotary Surface Grinder – Installation, Operation & Maintenance Manual – 53 pgs
Sunnen Cylinder King Model CV-616 Automatic Vertical Honing Machine – Parts Manual – 26 pgs
Sunnen Model CV-616 Install, Setup & Maintenance Manual – 57 pgs
Sunnen Model MBB-1600 Precision Honing Machine – Operation & Maintenance Manual – 35 pgs
Sunnen Model MBB-1600, 1600MS, 1600JIC Precision Honing Machine – Operation & Maintenance Manual – 40 pgs
Sunnen Model MBB-1600, 1600MS, 1600JIC Precision Honing Machine – Parts Manual – 20 pgs
Sunnen Model MBB-1650, 1650MS, 1650JIC Precision Honing Machine – Operation & Maintenance Manual – 40 pgs 165B
Sunnen Model MBB-1650, 1650MS, 1650JC Precision Honing Machine – Parts Manual – 30 pgs
Sunnen Model MBB-1680, 1680MS, MBH2580, 2580MS Precision Honing Machine – Parts Manual – 38 pgs
Sunnen Model PF-1000 Grit Guard Oil Filter – Operating & Maintenance Manual – 8 pgs
Sunnen Model PF-1005 & PF-1006 Oil Filter – Parts Manual – 12 pgs
Sunnen Model PF-150 Grit Guard Oil Filter – Installation, Operating & Maintenance Manual – 11 pgs
Superior Model HM 3390 Honing Machine – Maintenance & Parts Manual – 18 pgs
Supermax Vertical & Horizontal MM – Operators & Parts Manual – 73 pgs
Supermax YCM-2GS Mechanical Manual – 103 pgs
Supertec STP-1834A AD – 1022A AD Hydraulic Surface Grinder – 78 pgs
Sweo Controls – Model 840 Regenerative DC Drive – Install & Service Manual – 69 pgs
Swisher Grinder – Operation, Maintenance & Parts Manual – 11 pgs
Stanko Drill Manual Pdf
For more information on pricing and availability of all manuals please contact:
Pricing for all manuals listed above:
Libreoffice draw for mac. For Manuals under 25 pages – Please call for Special Pricing.
$40.00 total – from 0 to 50 pages
$80.00 total – from 51 to 100 pages
Add $1.00 per page for all pages above 100
Example: a 256 page manual would cost = $236.00
Add $80.00 – for first 100 pages Hip n happy mac lip liner.
Stanko Drill Manual Online
Add $156.00 – for pages above 101 ($1.00 per page)
Stanko Drill Manual Tool
Total $236.00